Epoxy resin crystal clear, cast epoxy resin or crystal clear cast epoxy resin. For making transparent casts that are not resistant to yellowing due to UV rays. For objects that are somewhat smaller / thinner due to faster operation, heat is quickly generated when pouring in compound!
Instructions for use: Mix the components 2 parts by weight resin and 1 part by weight hardener thoroughly homogeneously. Combine resin and hardener and mix well without air inclusions. Apply the mixed resin. The long working time and low exothermic peak make it suitable for making larger objects. Max. recommended thickness 10 cm. Demold after 36 h.
Post-treatment: For systems that cure at room temperature, post-treatment with heat is always recommended to obtain the best mechanical properties. Post-treatment is required if the piece is used at high temperature. Heat the piece as indicated in the table. Avoid heat gradients above 10 ° C per hour. The heat gradient and post-treatment time are given for standard parts. The user is advised to determine the optimum conditions for his parts depending on the shape and size of the object to be cast (for large parts, lower the temperature gradient and increase the post-treatment time, small parts and composites post-treat) a grid).
Storage and handling: Epoxy resin can be stored in the tightly closed original packaging. Keep cool and dry. The hardeners are sensitive to moisture. The resin may crystallise at low temperature. Heat the product to 80 ° C for a few hours to regain its original properties.