Hydrochloric acid 30% is a transparent, concentrated agent.
Can be used, among other things, to mix in special patina and to remove cement haze or stubborn dirt.
It can be used both indoors and outdoors as long as it is not used on acid-sensitive surfaces such as enamel, zinc, polished marble, manganese-containing stones, Westwalder clay stone, etc.
Important:
Ensure sufficient ventilation during processing.
Wear suitable gloves, protective clothing and face protection.
We recommend that you test the material to be treated beforehand.
Dilute hydrochloric acid 30% approx. 10 ×, depending on the degree of contamination.
A dilution of 1:10 is usually sufficient to remove a slight cement haze.
Hydrochloric acid and bleach should never be combined as this releases chlorine gas.
Can be used pure and diluted
VERY IMPORTANT is the order of dilution. Always add the hydrochloric acid to the water and never vice versa.
Hydrochloric acid is a product that must be used carefully to avoid unwanted discolouration or damage to the surface.
Keep out of the reach of children.
Hydrochloric acid 30% is a corrosive (caustic) product and causes burns.
Irritating to eyes, respiratory system and skin (in case of eye contact, rinse immediately with plenty of water and seek medical advice).
In the event of an accident or if you feel unwell, seek medical attention immediately
Can only be shipped with ADR transport, inform about info@bick.be Sale to professionals only.